Things To Check When Purchasing A Tent


When purchasing a party tent for use or the party tents for sale, we consider the following options:


The numbers D and T indicate the material’s resistance; in this case, Nylon ripstop. The number in millimeters indicates the fabric’s waterproofing, and the rest of the information corresponds to the type of coating used to waterproof it.

Therefore, generally, a higher D and T number indicate greater strength and durability of the fabric. It is important to note that profitable brands seek a balance between strength, durability, and weight of the fabric according to the use for which the tent was designed.

Concerning the coating, the industry standard is polyurethane, but nowadays, with siliconization, the same performance is obtained but at a lower weight and more outstanding durability.

But the quest to lighten the weight has led specialized brands to offer ultra-light carbon fiber rods or, in the case of MSR. They, together with Easton, have revolutionized the market with Easton Syclone rods made of fiberglass. Composed of class S, an aerospace-grade material that offers the best aluminum and carbon fiber properties but with considerably more excellent durability and resistance, they are presented as “indestructible” since laboratory tests give it 80% more resistance to breakage and bending fatigue compared to aluminum studs.


Weight is a factor to consider if you will carry the tent on your back for many hours or even days. Mind you, as we noted earlier, lighter tents tend to sacrifice durability and livability. As data, we can tell you that most brands deliver two weights in their specifications, the packed weight that corresponds to everything packaged, including the labels, and the minimum weight that only includes the body of the tent, the roof cover, and the rods. . Beware of dubious brands, since sometimes the weight of their products is quite far from the real weight.

Capacity And Dimensions

Usually, the name of the tent’s model is accompanied by a number that indicates the number of people for which it is intended. However, no industry standard defines dimensions per person, so the size of a 2-person tent can vary from brand to brand. Also, the ultralight models tend to be tighter and have a smaller interior surface. Review the specifications and consider data often overlooked, such as the users’ height; some models can be very small or very low for very tall people. If you are very old, consider the option of acquiring a tent for one more person than you initially had contemplated. Also, keep in mind that on outings to high and cold hills or winter outings,

Number Of Accesses

There are models with one door or two. The advantage of having two entrances is their comfort to the roped in winter or stormy conditions. One access can, for example, be used for cooking or melting snow and the other for entering and leaving the tent.


Each model indicates the impermeability of its materials in millimeters of water column (mmH20). The standard waterproofing test consists of applying the pressure of a column of water on a tissue sample until three drops can pass through it. Having said the above, it can be deduced that the larger the number of mm of a fabric, the more excellent its impermeability.

A roof covering is usually made of Nylon, which requires polyurethane coatings to be waterproofed. A polyurethane coating is technically 100% waterproof. Still, reputable brands usually apply two or three coats to ensure that the tent is fully waterproof and that the waterproofing is durable over time. Some models can be found on the market that offers between 5,000 and 10,000mm of waterproofing, which is often achieved due to a very thick layer, which gives weight, rigidity, and in the long run, a shorter useful life to the roof cover.

In the MSR brand laboratory, the water-resistance of a standard umbrella was tested, yielding a waterproof rating of 420mm, which shows that you don’t need such a high number to keep you dry. As a last piece of information regarding waterproofing, we can tell you that it is generally the floor of the tent that offers more excellent resistance to water since it is in constant contact with the surface and receives a load of users, which makes it more susceptible to overstepping given the pressure and abrasion to which it is subjected.


Comments are closed.